High-level acetic silicone sealant
▪Easy to apply
▪Single-component, room-temperature curing, acetic
▪Available in a wide range of colors
▪Can be applied in any season.
▪Good adhesion on many materials and glass
▪Stable and flexible from -50°C to +100°C
▪bonding of glass, rubber, wood, pottery, metal and surface of fiber, this product not suitable to use under water, and not suitable for bonding of dope, please finish brushing before construction.
▪Interior decoration works
▪Building interior windows and doors
▪Other general construction
▪The surface of the glued material must be cleaned by solvent or suitable detergent, dry and free from any dust particles, grease and oil.
▪Cut the nozzle at an angle and apply the sealant with a hand or air operated cartridge gun.
▪Suitable sizing temperature range of 5 ℃ ~ 40 ℃.
▪Clean the surface to get rid of the rust, oil, or any dirty.
▪Cut the cap point, twists the cap mouth, cut at 45 degree angle bevelling according to need.
▪If further sealing needed, please finished operation within 5 minutes, wipe off the surplus glue with dry tissue.
▪Prevent structural bonding and sealing.
▪Can't use on oily or exudate materials.
▪In addition to stainless steel, fluorocarbon and alumina materials, prevent the use of other metal materials or surface with a coating material bonding seal.
▪Prevent bonding and sealing of mirror glass and glass coating surface.
▪Uncured sealant may irritate eyes, respiratory system and skin. In case of eye contract, rinse immediately using plenty of water and seek medical advice.
▪Use only in a good ventilated place. Do not ingest.
Store in a cool, dry place (＜27°C), keep away from direct sunlight.