Efficiency fast dry metallic spray paint
The main component of this product is acrylic paint.
1.The material surface has to be free of any dirt,grease, rust etc.
2.Mask off adjacent panels to prevent overspray.
3.Shake can vigorously for about 30 seconds.
4.Hold the can 20cm from the surface to be sprayed. Press the nozzle and spray using a uniform hand motion.
5.Several thin coats applied at an intermittence of 3minutes are better than one heavy coat.
6.After use,clean the valve by turning the can upside down and pressing the nozzle for approximately 3seconds to prevent clogging.
7.Before disposing finished cans, turn the aerosol can upside down and firmly press the nozzle until remaining paint is emptied. If necessary, pull out the nozzle to clear.
8.For best results, do not apply during rainy days or humid environment (Rh≥80%). Test on a small area before actual application.
1.Store in room temperature(<40℃) and a well ventilated place,away from heat, open flames or other sources of ignition.
2.Avoid spraying into eyes or swallow.
3.Do not incinerate or puncture aerosol cans.
MADE IN CHINA