LIQUID RAW MEAL BELT
SH-100 THREAD SEALING ADHESIVES
Anaerobic Adhesive sealant for screw threads is a single component, common type thread locking & sealing adhe-sive with the features of medium viscosity, high strength and permeability. Using it on the tight fitted metal surfa-ces and it can be cure without air. Preventing the loose and leakage of fasteners, it apply to the locking and sea-ling for thread below M36, prevent the rust on thread.
HOW TO USE
1.Clean the surfaces without oil and keep dry.
2.Apply several drops of the glue onto the bolt at the nut engagement area, circumrotate a few rounds, then stop at the area where already applied with several drops glue.
3.Don't move before totally curing.
1.Anaerobic adhesive cannot be packed in metal tank; Even pack with other containers, full packed is limited.
2.It has certain irritation to skin, keep out of children touch; If any occasional accident happened, clean that immediately with water.
3.Forbidden to fill the adhesive back to the bottle.
Time for Beginning Hardening: 10-15 minutes
Classification: One Component Common Type
Shelf Life: 24 Months
Net content: 50g